Breathing mode assessment with thermography: a pilot study. / Avaliação do modo respiratório por meio da termografia: um estudo piloto.

PURPOSE: To present a method for analyzing breathing modes with infrared thermography. METHODS: This exploratory cross-sectional study used 38 thermal images of inspiration and expiration with nasal breathing and simulated mouth breathing in four nasal breathers without respiratory complaints. Three different data selection forms (line, rectangle, and ellipse) were used to extract the minimum, mean, and maximum temperatures of the regions of interest (nose and mouth) using the FLIR Tools® software. RESULTS: Among the three selection forms, there was greater temperature variability obtained with the line, revealing limitations in this measurement. There were no differences between the rectangle and ellipse values, showing that both selection forms present similar temperature extraction results. The comparison results between nose and mouth temperatures during inspiration and expiration indicated a statistically significant difference between all measurements, except for mean inspiration temperatures with the rectangle and ellipse. The breathing mode can be distinguished in both inspiration and expiration when using mean mouth temperatures with the rectangle and ellipse. CONCLUSION: Breathing modes should be assessed based on mean mouth temperatures during inspiration, using the ellipse.

OBJETIVO: Apresentar um método de análise do modo respiratório por meio da termografia infravermelha. MÉTODO: Estudo transversal exploratório de 38 imagens térmicas que representavam o momento da inspiração e da expiração durante a respiração nasal e durante a simulação da respiração oral de quatro voluntárias respiradoras nasais sem queixas respiratórias. Para a extração da temperatura das regiões de interesse (nariz e boca) foram utilizadas três formas de seleção distintas de dados (linha, retângulo e elipse) e três medidas de temperatura (mínima, média e máxima) por meio do software FLIR Tools®. RESULTADOS: Dentre as três formas de seleção houve maior variabilidade nas medidas obtidas pela linha, revelando limitações nessa medida. Não houve diferenças entre as medidas do retângulo e elipse, mostrando que ambas as formas de seleção apresentam resultados semelhantes para a extração das temperaturas. Na comparação entre as temperaturas do nariz e da boca na inspiração e expiração, os resultados indicaram que houve diferença com relevância estatística em todas as medidas realizadas, exceto para as medidas de temperatura média da inspiração, usando o retângulo e a elipse. Percebe-se diferenciação do modo respiratório tanto na inspiração quanto na expiração quando utilizada a temperatura média da boca com o retângulo e a elipse. CONCLUSÃO: Sugere-se para avaliação do modo respiratório a avaliação da boca, por meio da elipse, com análise da temperatura média durante a inspiração.

Exploring the body surface temperature of the lumbosacral region and relevant back-shu points in patients with lumbar disc herniation induced low back pain based on infrared thermography. / åŸºäºŽçº¢å¤–çƒ­æˆåƒæŠ€æœ¯æŽ¢è®¨è °æ¤Žé—´ç›˜çªå‡ºç—‡è °ç—›æ‚£è€ è °éª¶éƒ¨åŠç›¸å ³èƒŒä¿žç©´è¡¨çš®æ¸©åº¦.

OBJECTIVES: To observe the body surface temperature of the lumbosacral region and relevant back-shu points in patients with lumbar disc herniation (LDH) induced low back pain utilizing infrared thermography, and to explore the functional attribute changes of acupoints under pathological conditions. METHODS: A total of 50 patients with LDH induced low back pain were included as the observation group, and 45 healthy subjects were included as the control group. Using infrared thermography, the body surface temperature of the lumbosacral region and bilateral Sanjiaoshu (BL 22), Shenshu (BL 23), Qihaishu (BL 24), Dachangshu (BL 25), Guanyuanshu (BL 26), Xiaochangshu (BL 27), and Pangguangshu (BL 28) was measured in both groups. The temperature difference values between the bilateral lumbosacral regions and back-shu points of the two groups were calculated. Additionally, the body surface temperature of the affected and healthy sides of the lumbosacral region and relevant back-shu points was compared in the observation group. RESULTS: Compared with the control group, the body surface temperature of the lumbosacral region and the bilateral temperature difference values of the lumbosacral regions were increased in the observation group (P<0.001). The body surface temperature difference values of bilateral Shenshu (BL 23), Qihaishu (BL 24), Dachangshu (BL 25), Guanyuanshu (BL 26) and Xiaochangshu (BL 27) in the observation group were higher than those in the control group (P<0.05, P<0.01, P<0.001). In the observation group, the body surface temperature of the affected side of the lumbosacral region as well as Shenshu (BL 23) and Dachangshu (BL 25) was elevated compared with that of healthy side (P<0.001). CONCLUSIONS: The patients with LDH induced low back pain have imbalanced and asymmetrical distribution of body surface temperature in the lumbosacral region and related back-shu points, Shenshu (BL 23) and Dachangshu (BL 25) have the relative specificity.

Use of thermography in the long-term evaluation of scrotal surface temperature and its impact on seminal quality in stallions.

Scrotal surface thermography is a non-invasive method for assessing testicular thermoregulation in stallions; however, few studies have explored the application of this technique concerning the thermal physiology of equine reproductive systems. This study aimed to evaluate the consistency of testicular thermoregulation in stallions over a year using thermography to measure the scrotal surface temperature (SST). Moreover, we assessed the best region for measuring the surface body temperature compared with the SST. Ten light-breed stallions were used in the experiment. Thermographic images of the scrotal and body surfaces (neck and abdomen) were captured. Fresh, cooled and frozen-thawed semen samples were evaluated to verify the impact of thermoregulation on semen quality. Testicular thermoregulation was maintained throughout the year in stallions amidst changes in the external temperature, as evidenced by the weak correlation between the SST and ambient temperature. A lower correlation was observed between the environmental temperature and body surface temperature (BTS) obtained from the abdomen (BTS-A; R = .4772; p < .0001) than with that obtained from the neck (BTS-N; R = .7259; p < .0001). Moreover, both BTS-A and SST were simultaneously captured in a single image. The consistent quality of the fresh, cooled and frozen semen suggests efficient thermoregulation in stallions throughout the year.

Accuracy of infrared thermography evaluation in burn wound healing: a systematic review and meta-analysis.

OBJECTIVE: Accurate assessment of burn depth and burn wound healing potential is essential to determine early treatments. Infrared thermography (IRT) is a non-invasive and objective tool to do this. This systematic review evaluated the accuracy of IRT to determine burn wound healing potential. METHOD: This systematic review and meta-analysis used MEDLINE, EMBASE, CINAHL, PEDro, DiTA and CENTRAL databases. IRT data were extracted from primary studies and categorised into four cells (i.e., true positives, false positives, true negatives and false negatives). Subgroup analysis was performed according to methods used to capture thermal images. RESULTS: The search strategy identified 2727 publications; however, 15 articles were selected for review and 11 for meta-analysis. In our meta-analysis, the accuracy of IRT was 84.8% (63% sensitivity and 81.9% specificity). CONCLUSION: IRT is a moderately accurate tool to identify burn depth and healing potential. Thus, IRT should be used carefully for evaluating burn wounds.

Thermography Sensor to Assess Motor and Sensitive Neuromuscular Sequels of Brain Damage.

INTRODUCTION: The aim of this study was to observe the validity, diagnostic capacity, and reliability of the thermographic technique in the analysis of sensitive and motor sequelae in patients with chronic brain damage. METHOD: A longitudinal descriptive observational study was performed. Forty-five people with impairment in at least one anatomical region participated in and completed this study. All patients who had become infected by SARS-CoV-2 in the past year were excluded. Thermographic measurement was conducted, and the Modified Ashworth Scale and Pressure Pain Threshold was analyzed. RESULTS: A high correlation between two times of thermography data was observed. The Spearman correlations obtained between the Ashworth score on each leg and the temperature given by thermography were all significant. DISCUSSION AND CONCLUSIONS: Despite the above, the Spearman correlations obtained between the PPT in each leg and the temperature offered by thermography were not significant in any of the measurements. For this reason, thermography is a potential tool for the diagnosis and assessment of neuromuscular motor sequelae, but not for sensitive sequelae, after brain injury. Nevertheless, for the time being, no statistical relationship has been observed between the data reported by thermography and PPT; thus, future studies are needed to further investigate these results.

Thermography and conversion of fast-cure composite photocured with quad-wave and laser curing lights compared to a conventional curing light.

OBJECTIVES: This study investigated effects of the different emittance-mode protocols from three light curing units (LCUs): (i) a Laser (Monet); (ii) a quad-wave (PinkWave); (iii) a conventional LED (Elipar S10) on the temperature rise (ΔT) and degree of conversion (DC) when photo-curing fast or conventional bulk-fill resin-based composites (RBC). The aim was to correlate ΔT and DC, and the radiant exposure delivered to RBC specimens. METHODS: A 3D-printed resin mold of 4 mm depth was filled with two bulk-fill RBCs: Tetric PowerFill® (fast photo-polymerised composite) (TPF) or Tetric EvoCeram® Bulk-Fill (EVO). Three LCUs were used: (i) Monet laser for 1 s and 3 s (MONET-1 s, MONET-3 s); (ii) PinkWave quad-wave used for 3 s in Boost mode (PW-3 s) and for 20 s in standard mode (PW-20 s); (iii) Elipar S10 for 5 s (S10-5 s) and for 20 s in standard mode (S10-20 s). 2-dimensional temperature maps were obtained before, during and for 60 s after the LCU had turned off using a thermal imaging camera. Thermal changes were analysed at five depths: (0, 1, 2, 3, and 4 mm from the top surface of the RBC). The maximum temperature rise (Tmax) and the mean temperature rise (ΔT) were determined. Cylindrical-shaped specimens were prepared from each material using a stainless-steel split mold (4 × 4 mm) and light-cured with the same protocols. The DC was measured for 120 s and at 1 h after LCU had turned off using Fourier Transform Infrared Spectroscopy (FTIR). Data were analysed using Three-way ANOVA, One-way ANOVA, independent t-tests, and Tukey post-hoc tests (p < 0.05). RESULTS: Radiant exposures delivered by the various irradiation protocols were between 4.5-30.3 J/cm2. Short exposure times from MONET-1 s and PW-3 s delivered the lowest radiant exposures (4.5 and 5.2 J/cm2, respectively) and produced the lowest ΔT and DC. The longer exposure times in the standard modes of PW-20 s, S10-20 s, and MONET-3 s produced the highest Tmax, ΔT, and DC for both composites. The ΔT range among composites at different depths varied significantly (31.7-49.9 °C). DC of TPF ranged between 30-65% and in EVO between 15.3-56%. TPF had higher Tmax, ΔT for all depths and DC compared to EVO, across the LCU protocols (p < 0.05), except for PW-20 s and MONET-3 s. The coronal part of the restorations (1-2 mm) had the highest ΔT. There was a positive correlation between ΔT and DC at 4-mm depth after 120 s SIGNIFICANCE: Longer, or standard, exposure times of the LCUs delivered greater radiant exposures and had higher DC and ΔT compared to shorter or high-irradiance protocols. The fast photo-polymerised RBC had comparatively superior thermal and conversion outcomes when it received a high irradiance for a short time (1-5 s) compared to the conventional Bulk-Fill RBC.

Induced Current Electro-Thermal Imaging for Breast Tumor Detection: A Numerical and Experimental Study.

This study proposes using magnetically induced currents in medical infrared imaging to increase the temperature contrast due to the electrical conductivity differences between tumors and healthy tissues. There are two objectives: (1) to investigate the feasibility of this active method for surface and deep tumors using numerical simulations, and (2) to demonstrate the use of this method through different experiments conducted with phantoms that mimic breast tissues. Tumorous breasts were numerically modeled and simulated in active and passive modes. At 750 kHz, the applied current was limited for breast tissue-tumor conductivities (0.3 S/m and 0.75 S/m) according to the local specific absorption rate limit of 10 W/kg. Gelatin-based and mashed potato phantoms were produced to mimic tumorous breast tissues. In the simulation studies, the induced current changed the temperature contrast on the imaging surface, and the tumor detection sensitivity increased by 4 mm. An 11-turn 70-mm-long solenoid coil was constructed, 20 A current was applied for deep tumors, and a difference of up to 0.4  ∘ C was observed in the tumor location compared with the temperature in the absence of the tumor. Similarly, a 23-turn multi-layer coil was constructed, and a temperature difference of 0.4  ∘ C was observed. The temperature contrast on the body surface changed, and the tumor detection depth increased with the induced currents in breast IR imaging. The proposed active thermal imaging method was validated using numerical simulations and in vitro experiments.

Use of fidget and drinking behaviour in combination with facial infrared thermography for diagnosis of bovine respiratory disease in a spontaneous model.

Bovine respiratory disease (BRD) is a highly prevalent multi pathogen infectious disease (70-80%) in newly received feedlot cattle, causing significant economic losses and reduced animal welfare. Current BRD diagnosis involves stressful and invasive methods that can increase the incidence and transmission of BRD. An alternative is the use of an automated infrared thermography (IR) platform that can monitor facial temperature and behaviour traits to diagnose BRD in a non-invasive manner. The objective of this study was to investigate the use of fidget and drinking behaviours in conjunction with facial temperature as method of BRD diagnosis in beef calves. Sixty-five weaned calves (N = 65) were monitored over a 21-d period after 6 h transportation to predispose calves to BRD infection. Data collected from an automated IR platform placed at a water station included the number of IR frames during drinking (Fidget), number of drinking visits (Drinking bouts), total drinking duration, average drinking duration, average cheek temperature (AVG temp), and maximum orbital temperature (Max temp). Fidget, drinking behaviours, and IR were compared to a clinical score assessment based on respiratory, digestive, and lethargy signs (visual observation) and haematology analysis using a receiver operating characteristics curve analysis to identify the accuracy of each metric and combinations of metrics for BRD diagnosis. The greater accuracies observed were Fidget, Youden's index (J): 0.25 J), Drinking bout (0.28 J), and Total drinking duration (0.22 J). The average IR temperature accuracy resulted in 0.88 J and Max temp 0.77 J. Thirty-five combinations of drinking behaviour and facial IR metrics were evaluated to identify BRD calves. Optimum accuracy (100%) was achieved when combining Fidget, Drinking bout, Average drinking duration, AVG temp, and Max temp 1.00 J. Similar evaluations were performed at 48 and 24 h before d 0 using the most accurate Fidget, Drinking behaviour, and IR combination, resulting in 0.44 J 48 h prior to d 0 and 0.45 J 24 h prior to d 0. Combining fidget and drinking behaviour metrics increased the sensitivity to detect the onset of BRD infection and the specificity to discriminate true positive BRD calves from true negative BRD calves.

Applicability of thermography as a potential non-invasive technique to assess the body-thermal status of heat-stressed and water-deprived goats (Capra hircus).

To evaluate the use of infrared thermography to assess the thermal status of heat-stressed and water-deprived Capra hircus, full-body surface temperature (TS) and six other body-thermal variables [core, rectal (TR), and skin (TSK) temperatures, respiratory and heart rates, and total body-thermal gradient (core-to-ambient, BTG)] were measured after three days of euhydration (EU), dehydration (DE), and rehydration (RE). Results revealed that the combined effect of heat stress and water deprivation had affected all tested variables including the TS, and once these animals gained access to water in the RE stage variables returned to their EU levels. Moreover, there were positive correlations between TS and all variables with the exception of BTG. From these six variables, only three variables (i.e. the TR, TSK, and BTG) during the DE stage and two variables (i.e. the TSK and BTG) throughout the experimental stages showed higher constancy (R2 ≥ 0 75, P < 0 001; agreement intervals ±1 96 95 % CI) with TS. However, BTG appeared more closely correlated with TS, representing the body-thermal status more realistically than other variables. In effect, the mean and thresholds of the BTG were predicted using the recorded TS and were within 0.02 °C of original estimates. Collectively, these findings show that infrared thermography is appropriate for assessing body-thermal status, and thus the welfare, of these animals under the three conditions studied, and conclude that full-body TS can be a surrogate proxy for BTG in these animals. Further experiments are needed to adequately examine the reproducibility of these results under biometeorologically-simulated environments and natural habitats.

Non-invasive evaluation of vascular permeability in formalin-induced orofacial pain model using infrared thermography.

Enhanced vascular permeability at the site of injury is a prominent feature in acute inflammatory pain models, commonly assessed through the Evans Blue test. However, this invasive test requires euthanasia, thereby precluding further investigations on the same animal. Due to these limitations, the integration of non-invasive tools such as IRT has been sought. Here, we aimed to evaluate the use of thermography in a common orofacial pain model that employs formalin as a chemical irritant to induce local orofacial inflammation. Male Hannover rats (290-300 g, N = 43) were used. In the first approach, radiometric images were taken before and after formalin administration, assessing temperature changes and extravasated Evans Blue. The second approach included capturing pre- and post-formalin test radiometric images, followed by cytokine measurements in excised vibrissae tissue. Rats were anesthetized for vibrissae tissue collection, allowing correlations between thermographic patterns, nocifensive behavior duration, and cytokine levels in this area. Our findings revealed a positive correlation between local temperature, measured via thermography, and vascular permeability in the contralateral (r2 = 0.3483) and ipsilateral (r2 = 0.4502) side, measured using spectrophotometry. The obtained data supports the notion that thermography-based temperature assessment can effectively evaluate vascular permeability in the orofacial region.

Use of infrared thermography to detect reactions to stressful events: does animal personality matter?

The study of the relationship between animal stress and personality for free-ranging animals is limited and provides contrasting results. The perception of stressors by an individual may vary due to its personality, and certain personality traits may help individuals to better cope with them. Using non-invasive infrared thermography (IRT), we investigated the link between physiological and behavioral components expressed during an acute stress event by free-ranging Fremont's squirrels (Tamiasciurus fremonti). We expected that, during the acute stress event of being approached by the researcher, individuals that showed a fast pace-of-life syndrome (bolder, more active, and less social/more aggressive) based on an arena test would exhibit stronger sympathetic-adrenal-medullary system reactivity showing a more intense stress-induced hyperthermia (high core body temperature and low peripheral temperature) than individuals with a slow pace of life (shy, less active, and more social). We successfully employed IRT technology to images of Fremont's squirrels with identification of the individuals' body parts (eye, nose, ear, hind foot). However, we found no support for our hypothesis. Squirrels' body surface temperatures told us more about a squirrel's external environment and less about the thermal state of the body in that environment following a stressful event. Further studies need to assess how to make IRT effective and efficient in the field and improve its performance in studying the relationships between physiology and personality in wildlife.

Seasonal assessment of mastitis using thermogram analysis in Sahiwal cows.

"India is the world's leading producer of milk" and demands a non-invasive diagnostic tool like infrared thermography (IRT) to identify the costliest production disease, mastitis. It can form the basis of precision dairy farming. Therefore, the present study focuses on thermal imaging of the udder and teat quarters of Sahiwal cows during different seasons to identify subclinical (SCM) and clinical mastitis (CM) cases using the Darvi DTL007 camera. A total of 24-69 lactating Sahiwal cows were screened out using IRT regularly throughout the year. The intramammary infection status was further assessed using the CMT. The receiver operating characteristic analysis was carried out to develop the current study's cut-off for various thermographic parameters. The incidence for SCM and CM ranged from 26.47 to 38.75% and 17.83-22.79%, respectively during different seasons in Sahiwal udder quarters. The thermogram analysis revealed a significant difference (p < 0.01) in the mean values of the udder and teat surface temperature of Sahiwal cows between healthy, SCM, and CM during different seasons. The mean values of udder skin surface temperature (USST) during different seasons ranged between 29.07 and 36.91 °C, 31.51 to 37.88 °C and 32.42 to 38.79 °C among healthy, SCM, and CM-affected quarters, and correspondingly, the mean values of teat skin surface temperature (TSST) were 28.28 to 36.77 °C, 30.68 to 37.88 °C and 31.70 to 38.73 °C, respectively. Further results revealed an increase (p < 0.01) in the mean values of USST during winter, summer, rainy, and autumn as 2.44, 3.35; 0.97, 1.88; 1.06, 1.83; 1.29, 2.39 °C and TSST as 2.4, 3.42; 1.11, 1.96; 1.21, 2.19, 1.3, 2.4 °C of SCM, CM-affected quarters to healthy quarters, respectively, in Sahiwal cows. Thermograms showed a strong positive correlation with the CMT scores of SCM, CM cases, and healthy samples. Henceforth, irrespective of the seasons studied in the present work, IRT is an efficient, supportive tool for the early identification of subclinical mastitis.

Capturing temperature changes on the ocular surface along with estrus and ovulation using infrared thermography in Japanese Black cows.

Pre-ovulatory follicles are cooler than the neighboring reproductive organs in cows. Thus, measuring the temperature of reproductive organs could be a useful method for predicting estrus and ovulation in cows, and the establishment of a non-invasive technique is required. In this study, we used infrared thermography (IRT) to measure ocular surface temperature as a potential surrogate for reproductive organ temperature. Five Japanese Black cows with synchronized estrus were subjected to temperature measurements in five regions of the ocular surface, including the nasal conjunctiva, nasal limbus, center cornea, temporal limbus, and temporal conjunctiva, twice a day (0800 h and 1600 h) during the experimental period. The temperatures in the five regions significantly declined in cows from estrus to ovulation. To the best of our knowledge, this study is the first to use IRT to show a temperature decrease in the ocular surface along with estrus to ovulation in Japanese Black cows.

Smartphone-based thermography to determine shunt patency in patients with hydrocephalus.

BACKGROUND: When shunt dysfunction is suspected, radiation exposure due to X-rays or a CT-scan is inevitable. Less-invasive and more reliable methods are warranted. In this study, we aimed to assess the usability of smartphone-based thermography to detect shunt patency in patients with hydrocephalus. METHODS: This prospective observational pilot study evaluated the use of smartphone-based video thermography to detect flow of cerebrospinal fluid in the shunt of 51 patients from the Department of Neurosurgery at a tertiary referral institute. Patients with a shunt for hydrocephalus without the suspect of dysfunction were included in the study from December 2021 to May 2022. RESULTS: We included 51 patients with a mean age of 53.3 years. Of these patients 14 were male (27.5%) and 37 were female (72.5%). The most frequent cause of the hydrocephalus was the normal pressure hydrocephalus followed by the congenital hydrocephalus. Most patients (96%) had a ventriculoperitoneal shunt, whereas two had a ventriculo-atrial shunt. In total, 43 patient (84%) had a shunt on the right side and 8 patient (16%) had the shunt located on the left side. In 45 patients (88.2%), we observed a clear flow of cerebrospinal fluid in the cooled shunt trajectory. CONCLUSIONS: The findings of this study indicate that in patients with a shunt to treat hydrocephalus, the smartphone-based video thermography may be a safe and simple alternative to show shunt patency without the exposure to radiation.

Preliminary study of finger temperature recovery in patients with diabetes mellitus following cold stimulation.

OBJECTIVE: To explore the difference in temperature recovery following cold stimulation between participants with and without diabetes mellitus (DM). MATERIALS AND METHODS: The participants without (control group; n = 25) and with (DM group; n = 26) DM were subjected to local cold stimulation (10º C for 90 s). The thermal images of their hands were continuously captured using a thermal camera within 7 min following cold stimulation, and the highest temperature of each fingertip was calculated. According to the temperature values at different timepoints, the temperature recovery curves were drawn, and the baseline temperature (T-base), initial temperature after cooling (T0), temperature decline amplitude (T-range), and area under the temperature recovery curve > T0 (S) were calculated. Finally, symmetry differences between the two groups were analysed. RESULTS: No statistical differences in the T-base, T0, and T-range were observed between the DM and control groups. After drawing the rewarming curve according to the temperature of the fingertips of the patients following cold stimulation, the S in the DM group was significantly lower than that in the control group (p < 0.05). Furthermore, the asymmetry of the base temperature of the hand was observed in the DM group. CONCLUSIONS: Following cold stimulation, the patients with DM exhibited a different rewarming pattern than those without DM. Thus, cold stimulation tests under infrared thermography may contribute to the early screening of diabetic peripheral neuropathy in future.

Testing the effectiveness of a polymeric membrane dressing in modulating the inflammation of intact, non-injured, mechanically irritated skin.

We investigated the inflammatory (IL-1 alpha) and thermal (infrared thermography) reactions of healthy sacral skin to sustained, irritating mechanical loading. We further acquired digital photographs of the irritated skin (at the visible light domain) to assess whether infrared imaging is advantageous. For clinical context, the skin status was monitored under a polymeric membrane dressing known to modulate the inflammatory skin response. The IL-1 alpha and infrared thermography measurements were consistent in representing the skin status after 40 min of continuous irritation. Infrared thermography overpowered conventional digital photography as a contactless optical method for image processing inputs, by revealing skin irritation trends that were undetectable through digital photography in the visual light, not even with the aid of advanced image processing. The polymeric membrane dressings were shown to offer prophylactic benefits over simple polyurethane foam in the aspects of inflammation reduction and microclimate management. We also concluded that infrared thermography is a feasible method for monitoring the skin health status and the risk for pressure ulcers, as it avoids the complexity of biological marker studies and empowers visual skin assessments or digital photography of skin, both of which were shown to be insufficient for detecting the inflammatory skin status.

Facial infrared thermography as an index of social anxiety.

Previous research on physiological indices of social anxiety has offered unclear results. In this study, participants with low and high social anxiety performed five social interaction tasks while being recorded with a thermal camera. Each task was associated with a dimension assessed by the Social Anxiety Questionnaire for Adults (1 = Interactions with strangers. 2 = Speaking in public/Talking with people in authority, 3 = Criticism and embarrassment, 4 = Assertive expression of annoyance, disgust or displeasure, 5 = Interactions with the opposite sex). Mixed-effects models revealed that the temperature of the tip of the nose decreased significantly in participants with low (vs. high) social anxiety (p < 0.001), while no significant differences were found in other facial regions of interest: forehead (p = 0.999) and cheeks (p = 0.999). Furthermore, task 1 was the most effective at discriminating between the thermal change of the nose tip and social anxiety, with a trend for a higher nose temperature in participants with high social anxiety and a lower nose temperature for the low social anxiety group. We emphasize the importance of corroborating thermography with specific tasks as an ecological method, and tip of the nose thermal change as a psychophysiological index associated with social anxiety.

Generative adversarial network: a statistical-based deep learning paradigm to improve detecting breast cancer in thermograms.

Thermography, as a harmless modality, thanks to its low equipment complexity in parallel with quick and cheap access, has been able to come up as a method with significant potential in the diagnosis of some cancers in recent years. However, the complexity of the images resulting from this method has caused the use of deep learning to interpret thermograms. A limiting factor in this process is the strong dependence of deep learning methods on the number of training data, which is a serious challenge in thermography due to the young age of this technology and the lack of available images. In this paper, an attempt is made to reduce the above challenge by utilizing the concept of statistical learning in such a way that the statistical distribution of the original data is estimated by using generative adversarial networks (i.e., GAN). Then, several fake images are reconstructed based on the estimated distribution in order to increase the training thermograms. Since the fake images are reconstructed based on similar statistics of real thermograms in each class, the effective features of each class are preserved to a significant extent in the reconstruction process. The use of this method indicates a significant improvement in the separation of healthy and cancerous thermograms compared to the benchmark method which does not use the concept of GAN in such a way that characteristics of sensitivity and accuracy are improved in ranges of 3-9% and 3-7%, respectively. In terms of specificity, although we have seen an improvement of up to 9%, in some cases, small drops of up to 2% have also been observed, which can still be justified due to the significant improvement in sensitivity and accuracy.

Temperature rise in photopolymerized adhesively-bonded resin composite: A thermography study.

OBJECTIVES: To assess visually and quantitatively the contributions of the adhesive layer photopolymerization and the subsequent resin composite increment to spatio-temporal maps of temperature at five different cavity locations, subjected to two irradiance curing protocols: standard and ultra-high. METHODS: Caries-free molars were used to obtain 40, 2 mm thick dentin slices, randomly assigned to groups (n = 5). These slices were incorporated within 3D-printed model cavites, 4 mm deep, restored with Adhese® Universal bonding agent and 2 mm thick Tetric® Powerfill resin composite, and photocured sequentially, as follows: G1: control-empty cavity; G2: adhesive layer; G3 composite layer with no adhesive; and G4 composite layer with adhesive. The main four groups were subdivided based on two curing protocols, exposed either to standard 10 s (1.2 W/cm2) or Ultra high 3 s (3 W/cm2) irradiance modes using a Bluephase PowerCure LCU. Temperature maps were obtained, via a thermal imaging camera, and numerically analyzed at 5 locations. The data were analyzed using two-way ANOVA followed by multiple one-way ANOVA, independent t-tests and Tukey post-hoc tests (α = 0.05). Tmax, ΔT, Tint (integrated area under the curve) and time-to-reach-maximum-temperature were evaluated. RESULTS: Two-way ANOVA showed that there was no significant interaction between light-curing time and location on the measured parameters (p > 0.05), except for the time-to-reach-maximum-temperature (p < 0.05). Curing the adhesive layer alone with the 10 s protocol resulted in a significantly increased pulpal roof temperature compared to 3 s cure (p < 0.05). Independent T-tests between G3 and G4, between 3 s and 10 s, confirmed that the adhesive agent caused no significant increases (p > 0.05) on the measured parameters. The ultra-high light-curing protocol significantly increased ΔT in composite compared to 10 s curing (p < 0.05). SIGNIFICANCE: When the adhesive layer was photocured alone in a cavity, with a 2 mm thick dentin floor, the exothermal release of energy resulted in higher temperatures with a 10 s curing protocol, compared to a 3 s high irradiance. But when subsequently photocuring a 2 mm layer of composite, the resultant temperatures generated at pulpal roof location from the two curing protocols were similar and therefore there was no increased hazard to the dental pulp from the immediately prior adhesive photopolymerization, cured via the ultra-high irradiation protocol.

Termografía infrarroja como método de diagnóstico en quemaduras: una revisión exploratoria de la literatura / Infrared thermography as a method of diagnosis in burns: an exploratory review of the literature

Objetivos: Revisar el uso y eficacia de la termografía infrarroja como instrumento diagnóstico y de medida de las quemaduras. Metodología: Se realizan 2 búsquedas, una general y otra específica, utilizando estrategia de búsqueda mediante un lenguaje controlado con términos MESH. Para seleccionar los artículos se filtra por título, resumen y palabras clave, además de aplicarse los criterios de inclusión y exclusión. Resultados: Durante la búsqueda general, se encontraron 165 artículos en PubMed, de los cuales 7 han sido seleccionados y 6 han sido incluidos. Mientras que con la búsqueda específica se obtienen 28 artículos, de los cuales se seleccionan 7 que no aparecían en la búsqueda general y se incluyen finalmente 6 de ellos. Conclusiones: La termografía infrarroja es un instrumento con mucho potencial y que ha mostrado buenos resultados, pero en ocasiones mucha variabilidad e inconsistencia, por lo que es necesaria la estandarización de una serie de medidas que nos permitan contrarrestar las dificultades a las que se expone y minimizar los sesgos, hecho que podrá mejorar más los resultados. Además, es necesaria una mayor investigación aplicando las variables térmicas encontradas para identificar el grado de influencia e importancia que tienen y comparar las diferentes modalidades de termografía infrarroja, estática y dinámica.(AU)

Objectives: To review the use and efficacy of infrared thermography as a diagnostic instrument and measurement of burns. Methodology: Two searches were carried out, one general and the other specific, using a controlled language search strategy with MESH terms. To select the articles we filtered them by title, abstract and key words, besides applying the inclusion and exclusion criteria. Results: During the general search, 165 articles were found in PubMed, of which 7 were selected and 6 were included. The specific search yielded 28 articles, of which 7 were selected that did not appear in the general search and 6 were finally included. Conclusions: Infrared thermography is an instrument with great potential that has shown good results but much variability and inconsistency at times, so it is necessary to standardize a series of measures that allow us to counteract the difficulties to which it is exposed and minimize biases, a fact that could further improve the results. In addition, further research is needed by applying the thermal variables found to identify the degree of influence and importance that they have and by comparing the different infrared thermography modalities, static and dynamic.(AU)